Leadtop Pharmaceutical Machinery
LeadTop Pharmaceutical Machinery Co., LTD Your Best Pharmaceutical Production Solution!
Add to Cart
High Efficient Tablet Pill Candy Film Coating Machine Pharmaceutical Coating Machine
This film coating machine can be used for coating various tablets, pills and sweets with organic film, water-soluble film and sugar film, etc. And it has such characteristics as high efficiency, low energy consumption and small floor area, etc. And it can be widely used for coating various tablets, pills and sweets with organic film, water-soluble film and sugar film etc. In such fields as of pharmaceutical, food and biological products etc.
| Tablet Film Coating Machine | |
| Max. tablet volume | 150 Kg / time |
| Sugar coating drum diameter | 1200mm |
| Feed inlet dia | 480mm |
| Coating drum speed | 2-18 r.p.m |
| Host machine motor power | 2.2 kw |
| Exhaust cabinet motor power | 5.5 kw |
| Exhaust blower air flow | 6457 m3/h |
| Hot air cabinet motor power | 2.2 kw |
| Air heater air flow | 2996 m3/h |
| Hot air cleanness | 100000 level |
| External dimensions of host machine | 900*860*1950 mm |
| Host machine weight | 280㎏ |
| External dimensions of hot air cabinet | 1570*1260*2030 mm |
| Hot air cabinet weight | 850 kg |
| External dimensions of exhaust cabinet | 950x950x1800 mm |
| Exhaust cabinet weight | 550 kg |
| Clean Air Pressure | 0.4Mpa |
| Air consumption. | 80 m3 /min. |
| Power | 3 phase and 5 lines15 kw |
Main Structure
1. Main Machine: During the film coating process in the major machine, it shows such features just as no dust fly off and no syrup splash, operation condition improvement, little cross contamination to tablets, simple coating process, coating time shortening as well as high production efficiency etc. The main machine adopts programmable controller (PLC) and touch screen system, which can adjust inlet air temperature, rotational speed and other technological parameters automatically, making no difference between various batches products with the same technical parameter.
2. Hot Air Cabinet: Firstly, air inhaled in through the centrifugal fan should be purified up to the 100,000 level after three times filtration, involving primary filtration, medium filtration and high filtration, then be heated by heat exchanger (steam or electric heating), finally, be blown to the drum of main machine to dry the tablets, the noise of which is less than 70 decibel.
3. Air Exhaust Cabinet: Used for pumping a ir out of drum form the main machine, making the working area under the negative pressure and equipped with filtrating device, dust removal system, and dust collecting system. The operating noise of the whole cabinet is less than 90 decibel.
4. Air Spray System: The system is made up with peristaltic pump, air spray gun (imported from Japan) and material connecting line, used for atomizing coating mediums. When coating sugar film, it should be equipped with the dropper.
5. Electric heating thermostatic stirrer: It is used for preparing the film coating mediums, composed by liquid touchable plate, electrical heating system, pneumatically motorized stirring system and so on, meet GMP standards.
Air Spraying System:
High-pressure uniform vaporized liquid can be sprayed though the crawler pump and the air spray gun imported from Japan.
Thermostatic Stirring Tank:
The mediums can be electrically heated and stirred into a uniform liquid at a preset temperature.
Characteristic:
1. All operations can be finished through pushing the touch key on the computer-controlled panel. The operational panel is a full-sealed slight touch film interface. The main machine has reliable and stable performance.
2. The streamline guiding-type mixer drives tablets to make easy and smooth rotation without fragment and chipped edge, which improves the quality of finished products.
3. Automatic feeding device stopped the cross pollution, convenient to feed, with high efficiency and full direction. The coating boiler equipped in the high pressure spray gun, which can rotate 1800, there set a cleaning sprayer at the air exhaust exit and hot air mouth, which can be rotated in automatic and full direction, without dead corner more convenient to clean.
4. Select the imported Japan ANEST IWATA spray gun. It's convenient to operate and easy to master and flexible controlled technological requirement. The spray gun head requirement must keep in the range of 0.29 MPa to 0.39 MPa.
5. Angle and sector can be adjustable, uniform density and particle in spray pressure and 0.4-0.5MPa in atomization pressure that avoid the dropping leakage and blockage phenomenon of size, uniform atomization and large spray area, practical to adjust flow, free leakage and blockage, angle and sector.
6. Film coating machine contains the mechanical device of cauldron wrapping little material can coat at least 20kg plain pills in 150 type coating machine, regulate through it inherent machinery, make a small mount of medium coat in cauldron and will not cause the wasted of dressing and greatly improve the scope of appliance.
Main Uses:
BG Series coating machine is a mult-function coating facility mainly supplied by pharmaceutical and foodstuff industries for sugarcoating or film-coating process.